2024.03.03
Today we have entered a new century, and the rapid development of medicine has provided a brand new medical environment. Various surgical equipment plays a crucial role in medical use, and it is important to pay attention to maintenance during use in order to extend its mission. Below, we will focus on the maintenance of shadowless lamps, high-frequency electric knives, and electronic laparoscopes in operating room equipment.
1、 Maintenance of shadowless lamps
1. Regularly check whether the screws of the shadowless lamp are loose to prevent falling.
2. The shadowless lamp should be repaired by professionals every year, and non professionals are not allowed to disassemble the shadowless lamp or circuit at will.
3. Avoid damaging shadowless lamps with irritating chemical disinfectants to prevent corrosion.
4. The lamp head operating handle can be disinfected with low-temperature plasma.
5. When adjusting the shadowless lamp, pay attention to adjusting the distance to avoid collision or pulling the shadowless lamp shell.
When turning on the shadowless lamp, it should be gradually turned on from weak to strong, and not turned on too much at once to avoid damaging the bulb.
7. After use, the shadowless lamp should be set to the lowest brightness before turning off the power.
8. Clean the surgical lamp thoroughly before and after each surgery to ensure that it is dust-free and free of stains.
After the surgery, the shadowless lamp should be fixed in its functional position to maintain balance and prevent different weights from affecting the fixed function.
2、 Maintenance of high-frequency electric knives
1. Regular testing and maintenance of high-frequency electric knives by professional personnel to ensure safe use.
2. When using the electric knife pen tip, it should be wrapped in the right direction and not crushed or folded.
3. When the electric knife and pen are not used during surgery, they should be promptly returned to the tray to avoid burning the patient's hands.
4. The electric knife pen should undergo a power test every time it is used to ensure the safety of the operator's operation.
3、 Maintenance of electronic laparoscope
1. After self inspection of the pneumoperitoneum machine, check the pressure indicators and remind to replace the carbon dioxide storage cylinder as soon as possible to avoid changing the cylinder during surgery, which may affect the operation.
2. Camera wires and conduit wires should be handled with care and bending is prohibited.
During intraoperative operations, the operator should avoid bending the camera cable to prevent damage.
4. After the surgery, when removing the camera fiber optic cable, it is necessary to cooperate with the mobile nurse to firmly connect it, avoid damage from falling to the ground, cover the camera protective cap, and prohibit direct touching of the camera with hands.
5. Pay attention to keeping the instrument cart clean and do not collide during use.
The above is the relevant content about the maintenance of surgical equipment introduced to everyone, hoping to be helpful to everyone! The above is only a partial list of equipment maintenance methods. For other equipment maintenance methods, you can refer to the information or consult professional institutions.